DYCONN Sensor Faucet User Manual

Irrigation Systems

Product Features:

  • Modern design faucets
  • Water saving control
  • Lower power consumption
  • Intelligent sensor control
  • Stable & Reliable 

Sensor Faucet Manual for Models:

  • HF1H21-ORB (Sylvan), HF1H21-CHR (Trinidad) 
  • HF1H22-CHR (Heath), HF1H22-BN (Lawa)
  • HF1H23-CHR (Nelson), HF1H23-BN (Peace), (HF1H23-ORB) Snake, 

For easy installation of your Dyconn Faucet please do the following: – Thorougly read all instruction before installing the enclosed faucet. – Read and understand all warnings, care and maintenance information. 


READ ALSO: Kinetico Water Filtration System User’s Manual

Product Description & Information 



Do not place or install the product directly under the sun or long exposure of sunlight. Do not place any catoptric items such as mirror to the opposite wall of the inductive window. Do not use contaminated water with the device. Do not soak the device in water, this will causes permanent damage. 

Product Description & Information 


  • • Water saving control – sensor responds to object approach in 0.5s and stops once object leave sensor range. 
  • • Sanitation – automatic sensor keeps hand free of touching faucet 
  • • Intelligent sensor – Faucet will automatically stop if water flows over 1 minute. 
  • Sensor resets in 10s. Faucet stops working if water supply or power is out to minimize water leakage. 
  • • Low power consumption – 4 AAA batteries can be consumed for 2 years 300 cycles a day. 
  • • Stable & Reliable – all faucets are manufacture under harsh moisture and humidity test.


  • • Power Voltage: AC110 (60Hz) and Dc (4 x AA batteries) 
  • • Detection range: 12-18cm 
  • • Water pressure: 0.05 -0.6 MPa 
  • • Water Temperature: 0-80°C 

Tools you will need: 

Plumber’s putty 
Pipe tape
Philips Screwdriver 
Adjustable wrench 

Product Diagram and Parts 

Single inlet faucet

Models: HF1H21-ORB (Sylvan), HF1H21-CHR (Trinidad) 

Hot & cold inlet faucet

Models: HF1H22-CHR (Heath), HF1H22-BN (Lawa) 

Single inlet faucet

Models: HF1H23-CHR (Nelson), HF1H23-BN (Peace), (HF1H23-ORB) Snake 

  1. 1. Sensor faucet body
  2. 2. braided hose
  3. 3. Self-tapping screw
  4. 4. Plastic sleeve 
  5. 5. Rubber gasket
  6. 6. Stainless steel gasket 
  7. 7. Nut
  8. 8. Control box 

Battery installation

1. When the battery is out, the light sensor will flash in every 2 to 3 sec.

2. Replace the battery by taking off the cover and replace new battery. 

*** Main control unit can be powered by AC or battery alone. 

Control box 

Single inlet control box

Models: HF1H21-ORB (Sylvan), HF1H21-CHR (Trinidad) 

HF1H23-CHR (Nelson), HF1H23-BN (Peace), (HF1H23-ORB) Snake 

Clean filter:

1. Disconnect the power plug

2. Turn off waterway.

3. Take out filter screen with a plier.

4. Clean filter screen gently with running water and replace the screen. Connect the power. 

*** Hot/cold water mixing valve can be purchased. 

Sensor control box

Models: HF1H22-CHR (Heath), HF1H22-BN (Lawa) 

*Hot & Cold hoses connect directly to water supply. 

Installation – Single inlet faucet 

Single inlet faucet

Models: HF1H21-ORB (Sylvan), HF1H21-CHR (Trinidad) 

HF1H23-CHR (Nelson), HF1H23-BN (Peace), (HF1H23-ORB) Snake 

1. Connect with water inlet hose 

2. Put the hoses into basin sink hole 

3. Fix the sensor faucet body with filler pieces and nut 

4. Hang the control box on the wall fixture 

a. Drill two wall holes, and insert the plastic expansion sleeve and screws


5. Connect faucet hose to outlet part on control box. Connect inlet port on control box to pretempered water supply. Connect faucet sensor power cord to control box. Make sure everything is secured then connect control box power cord to power outlet. 

6. ***Optional: hot/cold water mixing valve can be purchased. 

See control box figure. Please test the water temperature before installation, hot water may cause serious burn. 

Installation – Hot & Cold faucet 

Hot & cold inlet faucet

Models: HF1H22-CHR (Heath), HF1H22-BN (Lawa) 

1. Connect with water inlet hose 

2. Put the hoses into basin sink hole 

3. Fix the sensor faucet body with filler pieces and nut 

4. Hang the control box on the wall fixture:

a. drill two wall holes, and insert the plastic expansion sleeve and screws 

5. Connect hot & Cold hoes to water supply. Connect faucet sensor power cord to control box. Make sure everything is secured then connect control box power cord to power outlet.

Sensor Adjustment & Troubleshooting 

Sensor Adjustment

  1. 1. Turn off the water circuit and remove the faucet from the counter sink.
  2. 2. Use a clamp pliers to pick off the sponge which is at the back of the sensor display.
  3. 3. Take the controller out, along the potentiometer and adjust lightly. Turning clockwise will increase the inductive distance, turning anti-clockwise will decrease the inductive distance.  


 Phenomenon   Reason    Solution 
No water comes out  Batteries run out
electricity cut off
power failure
water cut off
filter blocked
washing more than 1 min. 
Replace new batteries
waiting for resume
check power connection
waiting for resume
clean the filter
use it 10 sec later 
Can’t stop flowingBatteries run out
electricity cut off
power failure
Obstacle blocked 
Replace new batteries
waiting for resume 
check power connection
remove the obstacle 
Shut off faucet but low water flows low water pressure
filter is too dirty 
reset water pressure
clean the filter 
water rate is too small inlet hose too small
triangular valve didn’t open
low water pressure 
change a standard size hose
Open the valve at full 
reset water pressure 
Batteries short time limited used non-alkaline or poor quality battery replace new batteries 


Manufacturer Limited Warranty 

All Dyconn Faucet products are manufactured and tested with the highest quality standards and rigorous quality control process. This warranty is limited to the non-commercial use of Dyconn Faucet products purchased and installed in the United States and Canada. 

Dyconn Faucet Brand Limited Warranty on Faucets and Kitchen/Bath Accessories 

Dyconn Faucet warrants its faucet products to be free from manufacturing defects in material and workmanship during the normal non-commercial use for a period of three (3) years from the initial purchase date by the original owner/end-user for personal household use. Dyconn Faucet also warrants its part and accessory products to be free from manufacturing defects in material and workmanship during the normal non-commercial use for a period of one (1) year from the initial purchase date by the original owner/end-user for personal household use. This warranty is non-transferable between homes or owners and only applicable for residential use. Any commercial or industrial use of Dyconn Faucet products automatically voids the warranty. Any warranty claim must include the original sales receipt as proof of purchase from an Authorized Dealer or Distributor of Dyconn Faucet products. (Authorized Dealers can be found on the Dyconn Faucet website). 

Dyconn Faucet recommends installation of all Dyconn Faucet products by a licensed professional plumber. Dyconn Faucet will not be responsible for any damage or product failure due to improper installation, misuse or the failure to adequately utilize a licensed professional. Proper care and maintenance for all products is standard, like any other household appliance and fixtures to ensure proper function and a lasting product. Instructions are provided in your manual on proper care and maintenance of Dyconn Faucet products. 

This warranty will not cover any damages that might be caused by the product. (In some instances States do not allow for such limitations, so this may not apply to all owners). 

Any product reported to Dyconn Faucet as defective will be repaired or replaced (with a product of equal value) at the option of Dyconn Faucet. If Dyconn Faucet is not able to replace or repair the product, Dyconn Faucet may elect to refund the original purchase price to the original purchaser in exchange for the return of product. Dyconn Faucet has the full rights to inspect any Dyconn Faucet product reported as defective prior to repair or replacement. Any repair and replacement costs EXCLUDE shipping labor for removal or re-installation and any consequential or special damages associated with return, replacement and installa of your product. Replacement parts may be obtained by calling 1-855-239-2666 (in the U.S. and Canada), by emailing us at info@dyconnfaucet.com or writing to: 

Dyconn Faucet – 382 N. Lemon Avenue #122, Walnut, CA 91789 

Dyconn Faucet reserves the rights to modify the warranty at any time, it being understood that any such modifications will not supersede warranty conditions that are applicable at the time of the original sale of products in question. 

Though Dyconn Faucet products are certified by various agencies, Dyconn Faucet makes no implication that products comply with any or all local building or plumbing codes. It is the consumer’s responsibility to determine any code compliances when installing and using Dyconn Faucet products. 

Limitations of Warranty: 

The warranty shall be not apply and be void for incorrect operating procedures, breakages and/or damages caused by fault through improper installation, carelessness, abuse, misuse, misapplication, improper maintenance and alteration of product; damages caused by chemicals, natural corrosion, accident, fire, flood, an act of God, or any casualty. Avoid abrasive cleaners, materials, steel wools and harsh chemicals as these will scratch, damage, and/or dull the products and/or finish of the products and void the warranty. The proper installation of product covered is the responsibility of the original owner/purchaser of the product. Dyconn Faucet neither installs nor supervises the installation nor hires contractors for this purpose; consequently Dyconn Faucet cannot be held responsible for any default breakage, or damages caused thereby or resulting thereof, either directly or indirectly. 

This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Dyconn Faucet and all applicable rules, regulations, and legislation pertaining to such installations. 

This warranty does not apply to Commercial or Industrial applications of Dyconn Faucet products. 

Dyconn Faucet is not responsible or liable for personal injuries or deaths to any person for any direct, special, incidental, or consequential damage, loss of time, loss of profits, inconvenience, incidental expenses, labor or material charges, or any other cost resulting from the use of the product or equipment or pertaining to the application of the present warranty, or resulting from the removal or replacement of any product or element or part covered by this warranty. 

In any case, Dyconn Faucet is not liable for any amount over and above the purchase price paid for the Product by the original ownerlend-user. 

Cleaning and Care Care should be exercised when cleaning this product. Although its finish is extremely durable, it can be damaged by harsh abrasives and cleaning pads. To clean, use a light, non-abrasive cleaning solution or cleaning polish.

You can download he PDF version of DYCONN Sensor Faucet User Manual here.