User Friendly Manuals
Calibration NOTE: Your thermostat comes from the factory calibrated to+ or – 1°F actual temperature. It is an accurate instrument. If you want your thermostat to display the same temperature as another thermometer in your home, you can adjust its calibration. To change the calibration: The unit must be in the HEAT or COOL mode. […]
Statement of use: The 6025 can be used with – millivolt, 24V single and 2-stage conventional systems, gas/oil/electric heat, 1-stage heat pumps, 2 -stage heat pumps, zoned hot water (2 or 3 wire), zoned forced air, single and 2-stage cooling, and hybrid systems. Set Clock Set day of the week – Press SET CLOCK once […]
Statement of use: The 6O22 can be used with millivolt, 24V single and 2-stage conventional systems, gas/oil/electric heat, 1-stage neat Pumps, 2 -stage neat Pumps, zoned hot water (C2 or 3 wire), Zoned forced air, single and 2 -stage cooling, and hybrid systems. Set Clock Set day of the week Press SET CLOCK once to […]
Customer Support: 888-515-2585 or Visit our website www.ritetemp-thermostats.com Statement of use: The GPMG8022c can be used with most 24 volt gas, oil or electric heating and air conditioning systems, single-stage heat pumps or gas millivolt heating systems. It cannot be used with 120 volt heating systems or multistage heat pumps. 1 Set Clock Set day […]
Caution Your thermostat is a precise instrument, handle it with care. Turn off electricity to the appliance before installing or servicing thermostat or any part of the system. Do not turn electricity back on until work is completed. Do not short (jumper) across electric terminals at control on furnace or air conditioner to test the […]
Customer Support: 888-515-2585 or Visit our website www.riteternp-thermostats.com Caution :To avoid electrical shock and to prevent damage to the furnace, air conditioner, This can be done at the circuit breaker, or at the appliance Tools You will need #1 Phillips screwdriver (small) and Drill with 3/16-in. (4.8mm) bit for this installation. Location On replacement installations, […]
by 
