SentrySafe Security Safe Owner’s Manual (P021E)

^{Getting started}

Thank you for purchasing a SentrySafe Product. SentrySafe is the world leader in fire/water resistant and security storage. This guide describes how to easily set-up the product.

Contents Include:

– Compact Safe (1)
– Tethering cable (1)
– Black key lock cover (1)
– Interior padding (1)
– Override keys (2)
– Owner’s manual
– Warranty card

Instructions

Locate override keys.

Keys are stored in the packaging material.

Remove them before discarding the box.

Registration:

To be eligible for warranty coverage, the original purchaser must register the product online at www.sentrysafe.com.

1. Opening your security safe using the override key

Remove cover from key lock.

Insert override key into key lock, turn the key counter clockwise, one quarter turn to the unlocked position.

Turn the knob counter-clockwise to the unlock position.

To open, lift from the outer edge of the lid.

Note: to lock, return knob and key to the locked position.

2. Installing batteries

Slide the cover off the battery compartment.

Properly insert batteries, replace cover, and close the security safe lid.

3 ^{Programming 2 different personal codes}

Buttons 0-9 are used for user codes. When buttons are pressed, the green light flashes. If no keys are pressed for 20 seconds the lock automatically resets to the readiness, which requires the pass code to be re-entered.

To set first code:

Press the red setting button on the inside of the lid, the light will turn orange and 2 beeps are heard.

Input a code of 1-8 digits using the OPEN 0-9 keys.

Then press either “ * ” or “ # ” to confirm/save the code, the light will flash orange and 2 beeps are heard, indicating the first code has been saved.

To set second code:

Press 0 two times, press red code setting button, the light turns

orange and 3 beeps are heard.

Input a code of 1-8 digits using the 0-9 keys.

Then press either “ * ” or “ # ” to confirm/save the code, the light will flash orange and 2 beeps are heard, indicating the second code has been saved.

4 ^{Opening your security safe using the codes}

Enter either user code, then press “ * ” or “ # ” to confirm. Indicating light flashes green.

Turn the knob counter-clockwise, one quarter to the unlocked position.

Lift up on the outer edge of the lid to open.

Note: After 5 seconds automatically resets to the readiness mode.

5. ^{How to install tethering cable}

Open safe.
Put the end of the cable (non-loop end) in the hole on the left side of the safe (back corner).
Close lid and lock safe.

SentrySafe Customer Care

Thank you for purchasing a SentrySafe product. If you experience any problems or challenges with your safe, please contact us. Many issues can be resolved quickly without the product being returned.

Call our Customer Care department for assistance.

Customer Care: 1-800-828-1438

Registration: To be eligible for warranty coverage, the original purchaser must register the product online at www.sentrysafe.com.

Delay mode:

When an incorrect code is pressed, the light flashes red three times. If the wrong code is entered three consecutive times, the lock will be locked automatically for 20 seconds.

If the wrong code is entered six consecutive times, it will be locked for 5 minutes.

Low battery indicator, when red light comes on – batteries should be replaced.

Preserving user code:

When the lock power fails due to dead batteries, the codes will be preserved for approximately 3 hours, after that time the pass codes will be lost and will need to be reset.

Please note: A lock reference number is required to obtain replacement keys. The reference numbers and/or letters are engraved in the key lock cylinder as shown.

WARNING

This product is not intended for the secure storage of all materials. Items such as firearms, other weapons, combustible materials, or medication should not be stored in this unit.

www.sentrysafe.com

SentrySafe

900 Linden Avenue

Rochester, New York 14625

USA

Telephone: 585-381-4900

Customer Care: 1-800-828-1438 Fax: 585-381-2940

Compact Security Safe Owners Manual

Model: P008E

•••IMPORTANT•••

DO NOT RETURN SAFE TO THE STORE!

If you experience any problems or challenges with your safe, please contact us. Many issues can be resolved quickly without the product being returned.