EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP, MOONACHIE, NEW JERSEY, U.S.A.

Need help?

Please call toll free or visit our web site below

Call 1 866 309 8819

www.emersonaudiovideo.com

Register Online at www.emersonaudiovideo.com today to get the very most from your purchase

Registering your model with Emerson makes you eligible for all of the valuable benefits listed below, so don’t miss out.

Register Online at www.emersonaudiovideo.com to ensure:

*Product Safety Notification

By Registering your Product, you’ll receive notification -directly from the manufacturer – in the rare case of a Product Recall or Safety Defect

*Additional Benefits

Registering your Product guarantees that you’ll receive all of the Privileges to which you’re Entitled, including special money-saving offers.

Know these safety symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The caution marking is located on the rear or bottom of the cabinet.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Visit our World Wide Web Site at www.emersonaudiovideo.com

CHILD SAFETY: 

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY CARES

• Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable.

• As you enjoy your television, please note that all televisions — new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury. 

TUNE IN TO SAFETY

• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.

• ALWAYS read and follow all instructions for proper use of your television.

• NEVER allow children to climb on or play on the television or the furniture on which the television is laced,

• NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.

• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.

• ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.

• ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL)

• ALWAYS follow all instructions supplied by the television and mount manufacturers.

• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer.

• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

• Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions.

• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight.

• NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb.

• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments / accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Note to the CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 

Example of Antenna Grounding as per NEC – National Electric Code

Wall Mount Bracket Kit

	Brand	Model	Screw dimension
LF501EM5F	SANUS	PLASOB	M6 X 0.787(20MM)

• The recommended Wall Mount Bracket Kit (sold separately) allows the mounting of the TV on the wall.

• For detailed information on installing the wall mount, refer to the Wall Mount Instruction Book.

• Funai is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV Wall Mount Bracket or mount the TV onto the Bracket on your own.

• The Wall Mount Bracket must be installed by experts. 

Funai is not liable for these types of accidents or injury noted below.

• Install the Wall Mount Bracket on a sturdy vertical wall.

• If installed onto a ceiling or slanted wall, the TV and Wall

• Mount Bracket may fall which could result in a severe injury.

• Do not use screws that are longer or shorter than their specified length. If screws too long are used this may cause mechanical or electrical damage inside the TV set. If screws too short are used this may cause the TV set to fall.
• Do not fasten the screws by excessive force. This may damage the product or cause the product to fall, leading to an injury.

• For safety reasons use 2 people to mount the TV onto a Wall Mounting Bracket.

• Do not mount the TV onto the Wall Mounting Bracket while your TV is plugged in or Turned On. It may result in an electrical shock injury.

When installing the unit on the wall, allow this much space.

Top: 11.8 inches 30cm)

Left and right side: 5.9 inches (15cm)

Bottom: 3.9 inches (10cm) 

1 Notice

EMERSON and the G-CLEF logo are registered trademarks of

Emerson Radio Corp. in the U.S. and Canada, used under license by Funai Electric Co., Ltd and Funai Corporation, Inc.

Funai reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.

The material in this Owner’s Manual is believed adequate for the intended use of the system. If the product or its individual modules or procedures are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Funai warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.

Funai cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Funai will be adapted and published on the Funai support website as soon as possible.

Pixel characteristics

This LCD product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Service Centers and official repair shops. Failure to do so shall void any warranty, stated or implied.

Any operation expressly prohibited in this Owner’s Manual, any adjustments or assembly procedures not recommended or authorized in this Owner’s Manual shall void the warranty.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio or television technician for help.

Declaration of Conformity

Trade Name: Emerson

Responsible Party: FUNAI CORPORATION, Inc.

Model: LFSO1EMSF

Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.

Telephone Number: 1866 309 8819

Modifications

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the Owner’s Manual.

The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.

Cables

Connections to this device must be made with shielded cables with metallic RFI / EMI connector hoods to maintain compliance with FCC Rules and Regulations.

Canadian notice

CAN ICES-3 (B)/NMB-3 (B)

Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7

Copyright

All other registered and unregistered trademarks are the property of their respective owners.

The terms HDMI and HDMI

High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DOLBY DIGITAL

Manufactured under license from Dolby Laboratories Dolby and the double-D symbol are trademarks of Dolby Laboratories.

ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.

Consumer Notice:

This TV has been set to maximize energy efficiency while delivering the best. Possible picture using the factory installed home mode settings.

Changing or enabling other features in this TV (e.g. brightened backlighting) will possibly increase energy consumption beyond the original ENERGY STAR® qualified limits.

Portions of this software are copyright © The Free Type Project

(www.freetype.org).

The American Academy of Pediatrics discourages television viewing for children younger than two years of age.

 2014 Funai Electric Co, Ltd All rights reserved.

No part of this Owner’s Manual may be reproduced, transmitted, disseminated or transcribed, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this Owner’s Manual or any revision hereto is strictly prohibited.

2 Important

Positioning the TV

• Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.

• Make sure to hold the upper and bottom frames of the Unit firmly as illustrated.

• Install the Unit in a horizontal and stable position.

• Do not install the Unit in direct sunlight or in a place subject to dust or strong vibration.

• Depending on the environment, the temperature of this Unit may increase slightly. This is not a malfunction.

• Avoid a place with drastic temperature changes.

• Do not place anything directly on top or bottom of the Unit.

• Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the Unit is placed too close to them. In this case, please ensure enough space between the external devices and the Unit.

• Do not insert the AC power cord into the power socket outlet before all the connections are made.

• Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power.

• Before you move the TV, disconnect attached cables to prevent damage to connectors.

• Be sure to unplug the AC power cord from the AC outlet before moving or carrying the Unit.

• When moving the TV, please be careful not to pinch the AC power cord under the unit.

Regulatory Notices

Do not place the Unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling Unit can cause serious injury or even death.

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

Make sure to leave a space of 4 inches (10cm) or more around this apparatus.

Press to turn the Unit on and go into standby mode.

To completely turn off the Unit, you must unplug the AC power cord.

Disconnect the AC plug to shut the Unit off when trouble is found or not in use. The AC plug shall remain readily available. 

AC plug

Never use a gas duster on this TV.

The gas trapped inside of this Unit may cause ignition and explosion.

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

WARNING: To prevent injury, this apparatus must be securely attached to the furniture / wall in accordance with the instructions. Tipping, shaking or rocking the unit may cause injury / death.

Environmental Care

The packaging of this product is intended to be recycled.

Contact your local authorities for information about how to recycle the packaging.

For product recycling information, please visit – www.emersonaudiovideo.com

End of Life Directives

Emerson pays a lot of attention to produce environmental-friendly products in green focal areas. Your new TV contains materials which can be recycled and reused. At the end of its life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations.

Disposal of Used Batteries

In many areas batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations. 

Preparing to Move/Ship the Unit

Please pack the Unit properly by following the Diagram on the Carton.

 To avoid damage to the Screen, do not pack the stand on the same side as the TV screen.

3 Getting Started

Features 

• DTV/ Analog TV / CATV

You can use your Remote Control to select channels which are Broadcast in Digital format and conventional Analog format. Also, Cable and Satellite subscribers can access their TV channels.

• Information display

You can display on the TV screen the Title, contents (DTV only) and other information on the current Program.

• Auto program

This Unit Automatically scans and memorizes channels available in your area, Eliminating difficult Setup procedures.

• Child lock

This feature allows you to Block children’s access to inappropriate Programs.

• Closed Caption decoder

Built-in Closed Caption decoder displays text for Closed Caption supported Programs.

• MTS / SAP tuner

Audio can be selected from the Remote Control.

• Auto Standby

If there is no Input Signal and no operation for 15 minutes, the Unit will go into Standby * Batteries not included, AAA 1.5V x 2? Required mode automatically. 

• Sleep Timer

You can set the Unit to go into Standby mode after a specific amount of time.

• Choices for On-screen language

Select you’re On-screen language: English, Spanish or French.

• Stereo sound function 

• PLL frequency synthesized tuning Provides free and easy channel selection and lets you tune directly to any channel using the. Number  and decimal point keys on the Remote Control. When using a Universal Remote Control to operate this Unit.

• Various adjustments for Picture and Sound Customizes picture quality suitable for your room and set your sound preference. Refer to the instruction book accompanying your Remote Control for more details.

• Fun-Link via HDMI link fun-Link allows your other HDMI link Devices to be controlled by the HDMI cable connected to your TV.
• HDMI Input HDMI-DVI 

If your Video Device has a DVI Output jack, use an HDMI-DVI Conversion Cable to connect the unit. 

• Component Video Input

• PC Input

Input from a Computer.

• AV Input

Audio and video input from external device

• USB terminal If neither symbol appears, the operation is applicable to both.

The Picture (PEG) and Video (Motion JPEG) files stored on a USB Memory Stick can be played back on this Unit.

• Digital Audio Output

Digital Audio (Supporting Dolby Digital) sent to Home Theaters and other Digital Audio systems.

• Headphone Audio Output

Headphone 3.5mm Stereo jack for personal listening.

Supplied Accessories

Model	Quantity	Size
LF501EM5F	8	M4 x 0.472”(12mm)

*Batteries not included, AAA 1.5V x 2 Required.

NOTES

• If you lose the Screws, please purchase the above-mentioned Phillips head Screws at your local store.

• If you need to replace these accessories, please refer to the Part Name with the illustrations and call our toll free customer support line found on the cover of this Owner’s Manual
• Make sure the component code on your Universal Remote Control is set to our brand.
• We Do Not guarantee 100% interoperability with All Universal Remote Controls.

Symbols used in this Owner’s Manual

The following is the description for the symbols used in this Owner’s Manual. Description refers to:

Digital TV Operation

Cable NTSC (Analog) TV Operation

Stand Assembly 

Attaching the Base 

You must attach the base to the Unit to have it as a table top Unit. Be sure the front and rear of the base match the proper direction. For large screen TVs, at least 2 people are required for these steps.

Note(s)

• Make sure to use a table which can support the weight of this Unit and is larger than this Unit.
• Make sure the table is in a stable location.
• When attaching the base, ensure that “FRONT” with “arrow” written on the bottom of the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.

• When attaching the base, ensure that All Screws are tightly fastened. If the base is not properly attached, it could cause the Unit to fall, resulting in injuries as well as damage to the Unit.
• To remove the base from this Unit, unscrew the Phillips head screws in step 2. Be careful not to drop the base when you remove it

Installing the Remote Control Batteries

1. Slide the battery cover off the back of the Remote Control.
2. Insert 2 Batteries (AAA, 1.5V). Be sure the + and — ends of the batteries line up with the markings inside the case.
3. Slide the cover back into position. 

NOTES 

Remove the Batteries if not using the Remote Control for an extended period of time.

Remote Control

1. (POWER): Turns the TV On from Standby or Off to Standby.
2. PIC/SOUND MODE: Optimizes Picture and Sound quality.
3. FREEZE: Freezes Screen image for 5 minutes.
4. 0 – 9 (NUMBER keys): Used to enter a Channel / Program number.

(DOT) : Use with 0-9 to select Digital channels. For example, to enter 2.1, press 2>.>1>OK

PREV.CH : Returns to the previously viewed Channel.
CH + / – : Selects a Channel in the Memorized Channel Ring (Low to High or High to Low).

5. SAP
Selects Audio mode (MONO / STEREO / SAP) / Audio language.
6. VOL + / –
Adjusts the Volume.
7. D (MUTE)
Turns the Sound On and Off.
8. BACK
Returns to the previous Menu operation.
9. H I J K (NAVIGATION keys) / OK
Moves the cursor, Selects the On-screen Menu items.
10. SOURCE
Selects Connected Devices.
11. SLEEP
Sets Sleep Timer.
12. PICTURE SIZE A
Adjusts the Picture size on the TV screen.
13. INFO
Displays Information about the current program.
14. MENU
Opens the Main On-screen Menu.

Control Panel

1. VOL J / K
Adjusts the Volume.
VOL J : Volume Down
VOL K : Volume Up
In the Menu screen, moves the Cursor Left ( J ) / Right ( K ).
2. CH H / I
Selects a Channel in the Memorized Channel Ring (Low to High or
High to Low). In the Menu screen, moves the Cursor Up ( H ) /
Down ( I ).
3. MENU
Opens the Main On-screen Menu.
4. SOURCE
Selects Connected Devices.
5. B (POWER)
Turns the TV On and Off (Standby mode).
6. Remote Control Sensor
Receives IR Signal from Remote control.
7. Power On / Standby Indicator
(On : no light, Standby : red light)
8. Ambient Light Sensor
Alters the brightness of the TV screen Automatically by detecting your room lighting level. Do Not Block this Light Sensor window to allow proper operation.

Terminals 

9. Component (Y/Pb/Pr) / Composite Video (VIDEO) Input jacks for VIDEO
Composite Video Input (VIDEO) jack is a shared jack with
Component Video Input (Y) jack.
10. Analog Audio (L/R) Input jacks
Connect Analog Audio Signals from;
● HDMI-DVI / Analog Audio (L/R) jacks Signal
● Component Video / Analog Audio (L/R) jacks Signal
● Composite Video / Analog Audio (L/R) jacks Signal
● PC Connection / Analog Audio (L/R) jacks Signal with Stereo Mini 3.5mm Plug Audio Cable on PC
11. Digital Audio Output jack
Digital Audio (S/PDIF) Output to Home Theaters and other Digital Audio systems.
12. HDMI Input jack(s)
Digital Audio and Video Input from High Definition Digital Devices such as DVD / Blu-ray Disc players, Cable / Satellite Set-top Boxes and PC’s.
13. PC Input jack
VGA cable Connection for PC.
14. USB Terminal
Data Input from USB Memory Stick only.
Do Not Connect any Device to this terminal such as; Digital Camera, Keyboard, Mouse, etc.
15. 75 ohm Cable / Antenna Connection
Signal Input from an Antenna or Cable / Satellite Set-top Boxes.
16. Headphone Audio Output jack
Headphone 3.5mm Stereo jack for personal listening.

Connecting the Antenna, Cable or Satellite

Be sure you’re Antenna or another Device is connected properly before plugging in the AC Power Cord.

If connecting to an Antenna through an RF cable

Any DTV Programs that are broadcast in your area can be received for free through an Antenna Connection.

If you connect a Set-top Box through an RF cable

If the TV is connected to a Cable / Satellite Set-top Box via a Coaxial Connection, set the TV to channel 3/4 or the channel specified by the service provider.

If connecting a Set-top Box through an HDMI cable

If the TV is connected to a Cable / Satellite Set-top Box via an HDMI cable, make sure you select the correct Source by using SOURCE key on TV or Remote Control.

If connecting a Set-top Box through Component Video Input

If the TV is connected to a Cable / Satellite Set-top Box via Component Video Input, make sure you select the correct Component Video Source by using SOURCE.

Connecting a Set-top Box, Blu-ray Disc / DVD Recorder via Composite Connectors and Analog Audio

Do not place your Recorder too close to the Screen because some Recorders can be susceptible to Signals from the TV.

Notes 

• If you have any question about the DTV’s Antenna, visit www.antennaweb.org for further information.

• Depending on your Antenna system, you may need different types of combiners (mixers) or separators (splitters) for HDTV Signal. The minimum RF band pass on these Devices is 2,000MHz or 2GHz.

• For your safety and to avoid damage to this Unit, please unplug the RF Coaxial Cable from the Antenna Input jack before moving the Unit.

• If you did use an Antenna to receive Analog TY, it should also work for DTV reception. Outdoor or attic Antennas will be more effective than a Set-top Box or inside Antenna.

• To Tum On your reception source easily between Antenna and Cable, Install an Antenna selector.

• If you are not receiving a Signal from your Cable service, contact the Cable provider.

Plugging in the AC Power Cord

Make sure all the Necessary Connections are made before the AC Power Cord is plugged into an AC outlet.

 Caution(s)

• Do Not connect the AC Power Cord to an AC Power Supply outside the indicated voltage of this Unit (120V AC).

• Connecting the AC Power Cord to a Power Supply outside of this range may result in Unit failure, degradation or electrical shock.

 Note(s)

• Each time you plug in the AC Power Cord, no operations will be performed for several seconds. This is not a malfunction.

        No supplied cables are used with these connections:

• Please purchase the Necessary Cables at your local store.

Before you connect the AC Power Cord:

Be sure other Devices are connected properly before plugging in the AC Power Cord. 

Selecting your Connection quality

HDMI – Highest quality

Supports high-definition Digital signals and gives highest picture and sound quality. Video and Audio signals are combined in one cable. You must use HDMI for full high-definition Video and to enable fun-Link (HDMI CEC).

Note(s)

• Emerson HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a form of Digital Rights Management that protects high definition content in Blu-ray Discs or DVDs. 

Component (Y Pb Pr) – High quality

Supports high-definition Analog signals but gives lower picture quality than HDMI. Component (Y/Pb/Pr) Video cables combine red / green / blue Video cables with red / white Audio (L/R) Cables. Match the cable colors when you connect to the TV. 

Composite – Basic quality

For Analog Connections. Composite Video / Audio Analog cable usually combine a yellow Video Cable with red / white Audio (L/R) Cables. With this Unit, yellow cable must be connected to Y (green) jack on the Component Video Input jacks.

Connecting your Devices

HDMI Digital Connection

HDMI Connection offers the Highest Picture quality.

HDMI (High-Definition Multimedia Interface) transports high definition Digital Video and multi-channel Digital Audio through a single cable.

HDMI-DVI Connection

This Unit can be connected to your Device that has a DVI Terminal.

Use an HDMI-DVI Conversion Cable for this Connection and it requires Audio Cable for Analog Audio signal as well.

Note(s) 

• Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable is recommended for the Better compatibility.

For HDMI Connection

• The Unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of Video signals, 32kHz /44.1kHz and 48kHz of Audio signals.

• This Unit accepts 5.1 channel Audio signals (Dolby Digital) and 2 channel Audio signal (LPCM).

• This Unit accepts only signals in compliance with EIA861. For HDMI-DVI Connection

• The Unit accepts 480i, 480p, 720p, 10801 and 1080p Video signals.

• HDMI-DVI Connection requires separate Audio Connections as well and the Audio signals are Output as Analog (L/R) Audio. 

• DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.

Component Analog Video Connection

Component Analog Video Connection offers Better Picture quality for Video Devices connected to the Unit.

If you connect to the Unit’s Component Video (Y/Pb/Pr) Input jacks, connect Analog Audio Cables to the Analog Audio (L/R) Input jacks.

 Note(s)

• The Unit accepts 480i / 480p / 720p and 1080i of Video signals for this Connection.

Composite Analog Video Connection

Composite Analog Video Connection offers Standard Picture quality for Video Devices connected to the Unit.

If you connect to the Unit’s Component/Composite Video (Y/VIDEO) Input jack (green), connect Audio Cables to the Audio (L/R) Input jacks.

When the Audio is monaural, and then only connect to the Audio L Input jack.

Note(s)

• With this Unit, yellow cable must be connected to Y (green) jack on the Component Video Input jacks.

• Whenever you connect to the Composite Video Input jack (Y/VIDEO}, you must disconnect the Component Video Input jacks (Pb and Pr). If you leave those jacks connected, it may cause an unstable picture. 

Digital Audio Output Connection

IF you connect this Unit to an External Digital Audio Device, you can enjoy multi-channel Audio like 5.1ch Digital Broadcasting sound.

Use a Digital Audio Coaxial Cable to connect the Unit to External Digital Audio Devices.

PC Connection

HDMI Connection

This Unit can be connected to your PC that has an HDMI terminal.

Use an HDMI cable for this Digital Connection.

HDMI-DVI Connection

This Unit can be connected to your PC that has a DVI Terminal.

Use an HDMI-DVI Conversion Cable for this Video Digital Connection and it requires Stereo mini 3.5mm Plug Audio Cable for Analog Audio signal as well.

VGA Connection

This unit is equipped with a PC Input jack. If you connect this Unit to your PC, you can use this Unit as a PC monitor.

Use a VGA cable for this Video Connection and it requires a Stereo mini 3.5mm Plug Audio Cable for Analog Audio signal as well.

The following Video signals can be displayed:

Format	Resolution	Refresh rate
VGA	640 x 480	60
SVGA	800 x 600	60
XGA	1,024 x 768	60
WXGA	1280 x 768 1280 x 768	60
FHD	1,920 x 1,080	60

Other formats or non-standard signals will not be displayed correctly.

Note(s)

• Please purchase the VGA cable or HDMI-DVI Conversion Cable that has a ferrite core.
• The following operations may reduce noise.
• Attach a ferrite core to the AC Power Cord of your PC.
• Unplug the AC Power Cord and use the built-in battery of your Portable / Laptop PC.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable is recommended for the Better compatibility. 

• The Unit accepts 480i, 480p, 720p, 1080i and 1080p Video signals. 
• HDMI-DVI Connection requires separate Audio Connections as well and the Audio signals are Output as Analog (L/R) Audio.
• DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B. 

USB Memory Stick

This unit offers easy Playback of Picture (JPEG) and Video (Motion JPEG) files.

Insert the USB Memory Stick into the USB terminal shown below.

 Note(s)

• The Unit recognizes only a USB Memory Stick.

• Do not use a USB hub or an extension cable to connect an External hard disk drive to the Unit. (Not Supported.) 

• A USB Memory Stick is always inserted to this Unit directly.

• A USB Memory Stick is Not Supplied with this Unit.

• We Do Not guarantee that All USB Memory Sticks can be supported by this Unit.

• Be sure to keep a backup copy of the original files on your Device before you play them back on this Unit. We have no responsibilities for damage or loss of your stored data.

• To protect your USB Memory Stick files from being erased place the write protect sliding tab in the protect position.

• When you are ready to remove a USB Memory Stick, set the Unit to go into Standby mode to avoid any damage to your data and the Unit. 

• A USB Memory Stick that requires its own driver or the Device with a special system such as fingerprint recognition is Not Supported.

• This unit is not allowed to use the USB Memory Stick which requires an External Power Supply (500mA or more).

These Operations are accessible by Remote Control.

Some may also be accessible by the Main Unit’s Control Panel. 

Initial Setup

This section will guide you through the Unit’s Initial setting which includes selecting a Language for your On-screen Menu and Auto program, which Automatically scans and memorizes viewable channels.

Before you begin:

Make sure the Unit is connected to an Antenna or Cable.

1.  After making All the Necessary Connections, press to Turn On the Unit.

• It may take a few moments to Turn On the Unit for the first time.

• Initial setup menu appears automatically after the Unit is Turned On.

2.  Use to select the On-screen language from the choices (English) on the right side of the TV screen, then press OK

3.  Use to select Antenna for TV channels or Cable for CATV channels, then press OK.

– When Antenna is selected, the TV detects Antenna signals. It searches for DTV and Analog TV channels available in your area.

– When Cable is selected, the TV detects signals supplied by Cable. It searches for DTV, Analog TV and Cable channels available in your area.

Auto program will begin.

4. Use to select the desired Location setting, then press OK.

Home is the ENERGY STAR qualified setting.

• Select home. The unit is set to maximize the energy efficiency for home setting and it can be adjusted through a choice of Picture and Sound quality according to your preference. Use this setting to remove the E-sticker, if visible on the display. “=> p. 30

• You must set Home in step 4. Otherwise, Picture and Sound settings you adjusted will not be memorized after the Unit goes into Standby mode.

• When the Initial setup is completed, the Lowest Memorized Channel with the confirmation message of the Location setting will be displayed on the TV screen.

• Select Retail, the Unit will be set up with predefined settings for retail displays. In this setting, the Power Consumption may possibly exceed the limited requirement limit of the ENERGY STAR qualification.

Note(s) 

• If you are not receiving a signal from your Cable service, contact the Cable provider.

• If you press or MENU during Auto program, this Setup of TV channels will be Cancelled.

• The Initial Auto program function can be executed for either Antenna or Cable only Once. When you change the Connection (Antenna / Cable), select Auto program again.

After an Initial Setup is completed…

• IF you want to scan the channels automatically again. Auto program 

• You can add the desired Cable and Analog channels not memorized by Auto program. Add channels 

• If you want to change to another Language. 

• IF you want to change the Location setting. 

4 Use your TV 

Switching on your TV and putting it in Standby mode TV

To Turn the TV On from Standby or Off to Standby

• Press on the Rear panel or the Remote Control.

Note(s) 

• Energy Consumption contributes to air and water pollution. When the AC Power Cord is plugged in, your TV consumes energy with a very low standby Power Consumption.

Adjusting Volume

To decrease or increase Volume

* Press VOL on the Rear panel or press VOL + / — on the Remote Control.

VOL (-): Volume Down

VOL (+): Volume Up

To mute or unmute sound

• Press DX on the Remote Control to mute the sound.

• Press SX again or VOL + / — to recover the original sound.

Switching Channels

To select Channels by using CHV or CH +/-

• Press CH W (Down) / & (Up) on the Rear panel or press CH + /—on the Remote Control.

To select Channels by using the NUMBER keys

Digital TV Operation

• For Digital channels, press a number followed by a dot “*” and the corresponding sub channel number.

• When selecting Digital channel 11.1

Be sure to press * before entering the sub-channel number.

– When selecting Cable or Analog channel 11

-Press PREV.CH to return to the previously viewed channel.

Note(s)

• To select the non-memorized channels, use the NUMBER keys.
• No signal will appear on the TV screen after the sub channel broadcast is over.

• Audio only program message will appear on the TV screen, when you receive only a sound signal.

Watching Channels from an External Device

Switching Each Input Mode can easily switch with the Remote Control between TV (DTV or Analog TV) and External Devices when they are connected to the Unit.

1 Turn On the Set-top Box or the Connected Device.

• The picture from the Set-top Box or the Connected Device might appear Automatically on the TV screen.

If the picture does not appear

1. Press SOURCE Repeatedly to select the Set-top Box or the Connected Device and wait a few seconds between each selection until the Picture appears.

• Pressing reverses the direction of the Input modes.

2. Use the Remote Control for the Set-top Box or the Connected Device to select Channels to view.

Changing Picture and Sound Settings

1.  Press PIC/SOUND MODE to set your TV to a predefined Picture and Sound setting,

2.  Use to select one of the following settings:

Auto picture	Auto sound	Description
Personal	Personal	The Customized Settings you defined using the Picture and Sound menu
Standard	Standard	For normal TV viewing
Vivid	Vivid	Enhanced picture contrast, sharpness and sound for viewing in a well-lit room
Sports	Sports	Brilliant picture settings and clear sound for high action
Move	Move	Deep picture and powerful sound settings for a cinematic experience
Game		Optimized for PCs and game consoles
Eco		TV settings for low Power Consumption
	music	Optimized for Music Playback
	News	Controls Picture Tone and Sets the anchor’s Voice at a comfortable volume level

Sleep Timer

Sleep Timer can set the Unit to go into Standby mode after an incremental period of time.

Press SLEEP repeatedly to change the amount of time (increases the time by 30 minutes up to 120 minutes),

Press SLEEP Once to call up the display for checking the remaining time.

To cancel Sleep Timer, press SLEEP Repeatedly until off is displayed.

Freeze Mode

Freeze Mode can freeze the image shown on the TV screen for 5 minutes. =

Press FREEZE to freeze the image.

• The Sound Output will not be paused.

• To cancel Freeze Mode, press any keys except.

Switching Audio Mode

Digital TV Operation

Press SAP to display the currently selected Language 114 and the number of available Languages. 

Press SAP repeatedly to cycle through the available

Note(s)

• Available Languages differ depending on the Broadcast.
• Other is displayed when the Audio Language cannot be acquired or the acquired Languages are other than English, French or Spanish.

1 Press SAP to display the currently selected Audio mode

2 While receiving an MTS broadcast, press SAP Repeatedly 14 to cycle through the available Audio Channels. SAP/ STEREO e.g.) When All Audio Modes are available

Stereo: Outputs Stereo Audio

SAP:  Outputs a Second Audio Program

Mono:  Outputs Mono Audio

Changing Picture Format

Display Modes can be Selected when your TV receives a 16:9 or 4:3 Video Signal.

Three types of Display Modes can be Selected for a PC Input Signal.

Press PICTURE SIZE Repeatedly to Switch the TV Aspect Ratio.

For 16:9 Video signal

Full can also be selected after Wide if and HDMI Device is selected. This picture format similarly displays like Normal.

Normal	Original size
4:3	Shortened horizontally Sidebars appear on both edges of the screen.
Movie expand:	Vertically stretched to fill the screen.This only crops out the top of the picture
Zoom :	Maximum size without changing its horizontal and vertical ratio.
Wide	Horizontally stretched picture.These crops out the left and right sides of the picture.

For 4:3 Video signal

Full can also be selected after Wide if an HDMI Device is selected. This picture format similarly displays like 16:9.

Normal	Original size Sidebars appear on both edges of the screen.
16:9	Stretched horizontally to fill the screen
Movies expand.	Stretched more vertically at the top of the screen. This crops out the top of the picture
Zoom	Maximum size that is more vertically stretched to fill the screen.This crops out the top and bottom of the picture
Wide	Original size and the edges stretched horizontally to fill the screen.

For PC Input signal

• This Unit can also be connected to your PC that has a DVI Terminal.

Use an HDML-DVI Conversion Cable for this Video Connection and it requires a Stereo Mini 3.5mm Plug Audio Cable for Analog Audio signal as well,

Refer to 16:9 Video Signal on this page if the PC has an HDMI Output.

Normal	Proportionately stretched picture.Sidebars appear on both edges of the screen
Full	Stretched out of proportion to fill the screen.
Unscaled	Original size.

TV Screen information

You can display the currently selected channel or other information such as the aspect ratio on the TV screen.

In the Digital mode, the detailed broadcasting information for the current off the air channel, such as Program title, are displayed.

1 Press INFO

Digital TV operation

1. Program title
2. Broadcast station

Cable / NTSC (Analog) TV Operation

3. Channel Number

Switching channels “= p. 16

4. Audio Language (DTV) / Audio mode (Analog TV)

Switching Audio Mode = p. 17

5. Program’s image Aspect Ratio

Changing Picture Format = p. 18

6. CC (Not available if Closed Caption is set to Off)

Caption settings =» p. 24

7. Child Lock rating

Child and Ratings Lock = p. 26

2 Press INFO to hide the information,

 Note(s)

• When the program guide consists of more than 4 lines, use  to scroll to the next / previous lines.

• No description provided. is displayed when the program guide is not provided.

• While the TV screen information is displayed, the Closed Caption function is interrupted.
•  External Input mode, the following screen is displayed; Video. When an External Device is connected to Video Input jack.

• The information display will automatically disappear in 5 seconds.

5 Making more use with your TV 

This section describes the overview of the Main Menu displayed when you press MENU.

The Main Menu consists of the function setting items below. 

Displaying the main menu

1. Press MENU to display the main menu

2. Use to select the desired Menu and an item, then press OK or use to determine the setting

Picture

Before you begin:

You must set Home in Location.

Otherwise, personalized Picture and Sound settings will not be memorized after the Unit goes into Standby Mode.

1 Press MENU and use A ¥ to select Picture, and then press OK.

picture	Auto picture	Personal
Sound	backlight	18
Setup	Contrast	50
Features	Brightness	30
Language	Color	30
USB	Tint	0
	Sharpness	2
	Advanced setting

2 Use [image] to select the item you want to adjust, and then press OK.

Auto picture	To select the desired setting, then press OK. (Personal, Standard, Vivid, Sports, Movie, Game and Eco) When you adjust the following settings, Personal picture will be set Automatically when Location is set to Home.
	Cursor	cursor
Backlight	to Reduce Power Consumption and to Increase Power Backlight Consumption and reduce Backlight Brightness	To increase power consumption and brightness
Contrast	To decrease contrast	To increase contrast
Brightness	To decrease brightness	To increase brightness
Color	To decrease color intensity	To increase color intensity
Tint	To add red	To add green
Sharpness	To soften	To sharpen
Advanced settings	To Select the desired Setting, then press OK.(Color alignment, Noise reduction, Advanced settings | Ambient light sensor, Black stretch,Dynamic contrast, Gamma, Film mode and BMR 120)

Note(s)

• Adjusts Backlight for the Best Picture Quality by Dynamically Adjusting the Backlight Intensity in accordance with the Room Lighting Condition when Ambient light sensor is Set to On. Please ensure the Room Lighting is Stable and the Light Sensor is Not Blocked.

• You can set a Particular Picture Quality using Advanced settings.

picture	Color alignment	normal
Sound	Noise reduction	On
Setup	Ambient light sensor	On
Features	Black stretch	On
Language	Dynamic contrast	On
USB	Gamma	Gamma2
	Film mode	Audio
	BMR 120	On

Color alignment	Color temperature mode  Red gain Green gain Blue gain Red offset Green offset Blue offset	to set the picture color temperature to Personal (Cool, Normal or Warm) When you adjust the following settings, Personal picture will be set Automatically when Location is set to Home. Cursor Cursor To decrease red contrast To decrease green contrast To decrease blue contrast To decrease red brightness To decrease green brightness To decrease blue brightness	To increase red contrast To increase green contrast To increase blue contrast To increase red brightnessTo increase green brightnesstT increase blue brightness
Noise reduction	To select the desired setting then press ok
Ambient light sensor	Off On	To set ambient light sensor to off To adjust backlight for best picture quality based on the incoming video signal
Black stretch	Off On	To set black stretch to offTo enhance black color
Dynamic contrast	Off On	To set dynamic contrast to offTo enhance contrast in an image automatically
Gamma	Gamma 1Gamma 2Gamma 3	To change the gamma setting (changes brightness and contrast in the picture
Film mode	Off Auto	To set film mode to off To optimize the picture recorded by the film
BMR 120	Off On	To set BMR 120 to off To make the video appear smooth

SOUND 

Before you begin:

You must set Location to Home. = p. 30

Otherwise, personalized Picture and Sound settings will not be memorized after the Unit goes into Standby Mode.

1 Press MENU and use to select Sound, then press OK.

picture	Auto sound	Standard
Sound	Equalizer
Setup	Virtual surround sound	On
Features	Auto volume leveling	Off
Language	TV speakers	On
USB	Digital output format	Multichannel
	Primary MTS

2 Use[ images]  to select the item you want to adjust, then press OK.

Auto sound

To select the desired setting, then press OK.(Personal, Standard, Vivid, Sports, Movie, Music and News) When you adjust the following settings(Equalizer, Virtual surround sound and Autovolume leveling), Personal sound will be set Automatically.

Adjust the tonal quality for each frequency.

Equalizer

Cursor                                     cursor To adjust each level of tonal quality. Press BACK to go back to the previous menu

Virtual Surround Sound gives you the Stereophonic virtual space through our existing 2-channel Stereo System.

Virtual surround sound

Off          On

natural effect emphasized effect

This function keeps a constant loudness level between the TV commercials and the Programs.

Auto volume leveling

Off      On

to remove the auto volume leveling to reduce volume differences between the TV commercials and the programs

You can select the Audio Output from the Unit’s speakers or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this Unit, some sound operations such as volume up can be changed by using this Unit’s Remote Control.

TV speakers

On         Off         CEC link

To output sound from the unit speakers no output sound from the unit speakers to Control Audio Output from your connected fun-Link (HDMI CEC) Compliant Devices with VOL + / – by using this Unit’s Remote Control

You can select Audio Output through a Digital Audio Output connector.

Digital output format

Multichannel PCM

To Output Multichannel Signals(When the Audio of the Content is PCM, it will be Output in PCM even if Multichannel is selected.) PCM to Output PCM format.

 You can set the Output mode as a default for the Sound mode (Analog TV only).

This setting is not interlocked when you change the Output mode by pressing SAP. Refer to Switching Audio Mode. =» p. 17

Primary MTS

Stereo Mono SAP

To output stereo audio To output mono audio To output second audio program

Setup 

Before you begin:

Make sure the Unit is connected to Antenna or Cable.

1 Press MENU and use & W to select Setup, then press OK.

Picture	Auto program
Sound	Channel list
Setup	Add channel
Features	antenna
Language
USB

2 Adjust the following items.

Auto program

Be sure the RF cable is correctly connected to this Unit and you are registered with your Cable TV provider when you Install Cable channels.

1. Use to Select Auto program, then press OK.

• IF you run Auto program when you have Locked Channels, a Message appears asking to enter your PIN. Enter your Child Lock PIN in order to complete the Installation. (Default PIN code is 0, 0, 0, 0.) You need to reset or set the Channel Lock again after the Installation.

2. Use A V to Select an appropriate Option, and then press OK.

– When Antenna is selected, the TV Detects Any Off-the-Air Antenna Signals. lt searches for ATSC (Digital) and NTSC (Analog) Channels available in your Area.

– When Cable is selected, the TV detects signals supplied by Cable. It searches for DTV, Analog TV and Cable channels available in your area.

• When the Scanning and Memorizing of Available Channels is Completed, the Lowest Memorized Channel will be Displayed.

Note(s)

• After setting Auto program, using CH + / — skips unavailable channels automatically.

• If you are not receiving a signal from your Cable service, contact the Cable provider.

• If you press or MENU during Auto program, the Setup of TV channels will be cancelled.

• Even if Auto program is completed, the channel setting will be lost if the AC Power Cord is unplugged before the Unit goes into Standby mode by pressing o

• The PIN Code will be required once you set a PIN code in the Child and Ratings Lock. > p. 26

• If you want to change your PIN cade, follow the instruction for Change PIN. ==» p. 28

Channel list

The channels selected here can be skipped when selecting the channels using CH + /-.

Those channels can still be selected with the NUMBER keys.

1 Use to select Channel list, then press OK.

2 Use to select the channel you want to remove, then press OK.

• The channel display for the removed channel darkens. You will not be able to select the channel again using CH + /-.

• To reactivate a removed channel, use A VW and press OK. The registered channels are highlighted.

• When you remove a main channel, its sub channels are removed as well.

Note(s)

• The channel with DTV indicated on the display is ATSC. Otherwise the channel is Analog TV (NTSC).

Add channels

This function lets you add the off the air Analog TV or Analog Cable channels that were not added by the Auto program due to reception conditions during the Initial Setting.

1 Use to select Add channels, and then press OK.

2 Use the NUMBER keys to enter the number of the channel you want to add, then press OK.

Note(s) 

• If Setup completes successfully, added to the channel list. Is displayed.

• If External Input is used, it is not possible to register the channel and Unavailable will be displayed on the TV screen.

• Some channels cannot be selected by CH + / — Use the NUMBER keys to select the non-memorized Channel list channels. 

Antenna Confirmation

This function lets you check the Digital signal strength of each channel.

1 Use to select Antenna, then press OK.

2 Use the NUMBER keys or CH +/—to select the channel for which you want to check the Digital signal strength.

Note(s) 

• If the channel is set to an Analog channel or External Input, you cannot confirm the Antenna condition.

Features 

1 Display Setup using Home Menu and use A W to select Features, then press OK.

Picture	Caption settings
Sound	Child lock
Setup	Pc settings
Features	Fun link [HDMI CEC]
Language	Location	Home
USB	E sticker
	Software upgrade

2 Adjust the following items.

Caption settings

Closed Captions displays the Audio portion of the Program as Superimposed Text over the Video.

1 Use AV to Select Caption settings, then press OK.

Picture	Closed caption	Off
Sound	Caption service	CC-1
Setup	Digital caption service	CS-1
Features	Caption style
Language
USB

2 Use AV 4D to select the Feature you want to use, then press OK.

You can choose the Closed Caption display.

Closed captions	Off	Closed caption is not displayed
Closed captions	On	Closed caption is always displayed
Closed captions	CC w/mute	Closed caption is displayed when the sound is off

In addition to the basic Closed Caption, DTV has its own Closed Caption called Digital caption service. Use this menu to change the settings for Digital caption service.

Digital caption service

CS-1 to CS-6

Select one of these before changing any other item in Caption settings menu. Choose CS-1 under normal conditions

Caption service	CC-1 to T-1	The primary Closed Captions and Text Services. The Closed and Captions or Text is Displayed in the same Language as the Program’s Dialog (up to 4 lines of script on the TV Screen).
Caption service	CC-3 and T-3	Serve as the preferred Data and Channels. The Closed Captions or Text is often a Secondary Language.
Caption service	CC-2, CC-4, T-2 and T-4	Rarely available and broadcasters use them only in Special conditions, such as when CC-1 and CC-3 or T-1 and T-3 are Not available.

• There are 3 Display modes according to Programs:

Paints on	Displays Characters on the TV screen immediately.
Pop on	Once Characters are Stored in Memory, they are Displayed All at Once
Roll up	Displays the Characters Continuously by Scrolling (max. 4 lines).

You can choose the Font (Size, Color, etc.), Background and other Characteristics of the Closed Captions Text.

Caption style	Font	Font style Font sizeFont colorFont opacity	Closed captioning font size, style, and color transparency can be changed
Caption style	Background	Background colorBackground opacity	Background color and transparency of the displayed caption can be switched
Caption style	Edge	Edge colorEdge type	Edge color and type of the displayed caption cab ne switched

 Note(s)

• Closed Caption will NOT be displayed when you are using an HDMI Connection.
• Digital caption service that you can switch differs depending on the broadcast description.
• Caption style will not have any effect if the User setting is set to Off.
• The captions do not always use correct spelling and grammar.
• Not all TV Programs and product commercials include Closed Caption information or All types of the Closed Captioning. Refer to your area TV Program listings for the TV channels and times of Closed Caption shows. The captioned programs are usually noted in the TV listings with abbreviations such as CC.

• To show the Closed Caption on your TV screen, Broadcast signal must contain the Closed caption data.

• Captions and texts may not exactly match the TV voice.
• Changing channels may delay the Closed Caption for a few seconds.
• Adjusting or muting the volume may delay the Closed Caption for a few seconds.
• Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screen action. This is not a malfunction.
• The caption or text characters will not be displayed while the main menu or functions display is shown.
• If a black box appears on the TV screen, this means that the Closed Caption is set to the text mode. To clear the box, select CC-1, CC-2, CC-3, or CC-4. Refer to »—» p. 24
• If the Unit receives poor quality television signals (mainly when the Analog (NTSC) is received), the captions may contain Errors or there might be no captions at all. Some possible causes of poor quality signals are:

– Automobile ignition noise

– Electric motor noise

– Weak signal reception

– Multiplex signal reception (ghosts or screen flutter)

– Data dropout and Pixilation (for DTV only)

– The Unit retains the Closed Caption setting if the Power fails.

• When the Unit receives special effects Playback signal (e.g. Search, Slow and Still) from a VCR’s Video Output channel (ch3 or ch4), the Unit may not display the correct caption or text.
• The EUT setting that satisfies § 79.102 (€) is as follows:

– Font Mono-font

– Character Size: Large

Child and Ratings Lock 

You can prevent your children from watching certain Programs or certain function.

Channels by locking the TV Controls and by using Ratings

1. Use to select Child lock, then press OK.

Picture	Caption settings
Sound	Child lock
Setup	Pc settings
Features	Fun link
Language	Location	home
USB	E sticker
	Software upgrade

2. Use the NUMBER keys to enter the 4-digit numbers for your PIN code.

• When you have not set up your PIN code, enter 0, 0, 0, 0.
• When the PIN code is correct, Child lock menu is displayed.

See the following description for setting each item

Picture	Channel lock
Sound	US movie ratings lock
Setup	US TV ratings lock
Features	Canadian English rating
Language	Canadian French setting
USB	Region ratings lock
	Clear region ratings lock
	Change pin

Channel lock

Particular Channels or External Input modes can be invisible in this function 

3. Use to Select Channel lock, then press OK

4. Use to Select the Particular Channels or External Input, then press OK Repeatedly to Switch between Block and View.

Indicates that the Channel or Input Source is Locked (Block).

Indicates that the Channel or Input Source is Not Locked (View).

Note(s)

• When you select a rating and set it to the higher ratings will be Blocked Automatically. The lower ratings will be available for viewing.
• When you set the highest rating to, all ratings turn to automatically.
• To Block any inappropriate programs, set your limits in US movie ratings lock, US TV ratings lock and Region ratings lock.
• The Child Lock setting will be retained after a Power failure or after the Power is removed for longer than 10 seconds (except the PIN code reverts to 0000). Child and Ratings Lock = p. 26

• Region ratings lock and Clear region ratings lock will be available when the Unit receives a Digital broadcast using the New rating system.
• For the United States, the Unit may download the Region Ratings Lock Table, if required. 
• The Canadian rating systems on this Unit are based on CEA-766-A and CRTC policy.

Setting US Movie and TV Ratings

US Movie Ratings Lock is the Rating System created by MPAA.

US TV Ratings Lock has Controlled Access to Individual Programs based on their Age and Content rating.

3. Use to Select US movie ratings lock or US TV ratings lock, then press OK.

4. Use to Select the Desired Rating, then press OK Repeatedly to Switch between Block and View.

• For US TV Ratings, you can further set the Sub Ratings to Block Specific Elements within Programs.

• Indicates that the Rating is Locked (Block).
• Indicates that the Sub Rating is Locked (Block).
• Indicates that the Rating is Not Locked (View).

US movie ratings lock

US TV ratings lock

US movie ratings	US TV rating	description
All		All Ratings Locked including
NR	None	No Rating
	TV-Y	Appropriate for All Children
	TV-Y7	Appropriate for All Children 7 and Older
G	TV-G	General Audience
PG	TV-PG	Parental Guidance Suggested
PG-13		– Unsuitable for children under 13
	TV-14	Unsuitable for children under 14
R		Restricted under 17 RequiresAccompanying Parent or Adult Guardian
NC-17		No One under 17 Admitted
X	TV-MA	Mature Audience Only

To set the Sub ratings

As for TV-Y7, TV-PG, TV-14 or TV-MA, you can further set the Sub ratings to Block Specific Elements within programs. To set the Sub ratings, follow the step below.

Use to select the desired rating, then press OK Repeatedly to switch between 

US TV ratings	Sub rating
TV-Y7	Fantasy  violence
TV-PG	Dialog Language Sex Violence
TV-MA	Language Sex violence

Note(s)

• Blocked Sub Rating will appear beside the Main Rating category in US TV ratings lock Menu.
• You cannot Block a Sub Rating if the Main Rating is set to 01.
• Changing the Category to BJ or 0) automatically changes All its Sub Ratings to the same

Canadian English or Canadian French Ratings

You can select the Rating for Canadian English or Canadian French broadcasting.

3. Use to Select Canadian English rating or Canadian French rating, then press OK.

4. Use to Select the Desired Rating, then press OK Repeatedly to Switch between Block and View.

• Indicates that the Rating is Locked (Block).
• Indicates that the Rating is Not Locked (View).

Canadian English rating	Canadian French rating	description
All		Locked all ratings
E	E	Exempt program
C		For all children
C8+		For all children 8 and older
	G	General audience
	8ans+	Unsuitable for ages under 8
PG		Parental guidance suggested
	13ans+	Unsuitable for ages under 13
14+		Unsuitable for ages under 14
	16ans+	Unsuitable for ages under 16
18+	18ans+	Adults only

Note(s)

• The V-Chip can Block Non Rated Programs as per “CEA-608-E sec. L.3”. If the Option to Block NR, None or E Programs are used in US movie ratings lock, US TV ratings lock, Canadian English rating or Canadian French rating accordingly “unusual results may occur and the Unit may not Receive Emergency Bulletins or other Types of Programming’: / Emergency Bulletins (Such as EAS messages, Weather Warnings and Others) / Locally originated programming / News / Political / Public Service Announcements / Religious / Sports / Weather.

Change PIN

Although the default PIN code (0000) is supplied with the Unit, you can set your own PIN code.

3 Use to select Change PIN, and then press OK.

4 Press the NUMBER keys to enter the new 4-digit PIN code.

• Enter PIN code again in Confirm PIN. Entry field

Note(s) 

• Make sure to enter a PIN code and the confirm PIN code must be exactly the same. If they are different, the space is cleared to reenter the New PIN code.

• When a Power failure occurs the PIN code will be erased and Unit returns to the default PIN code (0000).

• If you forget the PIN code, unplug the AC Power Cord then wait for 10 seconds to plug the AC Power Cord in again. The Unit will restore the PIN code to 0000 (factory default). Then repeat the Change PIN procedure to Setup a New PIN code.

 PC settings

This function lets you adjust the PC screen position, clock and phase during PC Input.

Use to adjust Clock setting to stabilize the PC screen and Phase setting to improve the clarity of the PC screen.

1. Use to select PC settings, then press OK.

2. Use to select the item you want to adjust, then press OK.

• The horizontal/vertical position, clock and phase of the PC screen are Automatically adjusted.

Auto adjustment	Select if you want to adjust automatically
	cursor	cursor
Horizontal position	To move PC screen left	To move PC screen right
Vertical position	To  move PC screen down	To move PC screen up
ClockPhase	To decrease setting value	To increase setting value

Note(s)

• You may not obtain an appropriate screen with Auto adjustment for some signals. In this case, please adjust the settings manually. 

• Properly adjust the Clock setting and then adjust the Phase setting.

Fun-Link (HDMI CEC) Device list

This function allows you to operate the linked functions between our brand Devices with a fun-Link feature and this Unit connecting through an HDMI cable. You must connect this Unit to our brand fun-Link devices then press OK, and be sure it’s fun-Link (HDMI CEC) setting is also set to On.

1. Use to select fun-Link (HDMI CEC), then press OK. 

2. Use to select the item you want to adjust, then press OK.

Set the fun-Link control On or Off. The following additional settings will be grayed out when you set them to Off.

Fun link control	Off	Disables all fun link
	On	Selects if you have connected an external device that is compatible with the fun link function

You can set your connected fun-Link device to Turn Off by interlocking from this Unit’s Power.

Auto device off	Off	Your connected fun-Link device Off stays On even if the Unit goes into Standby mode.
	On	Your connected fun-Link device On Turns Off Automatically when the Unit goes into Standby mode

This Unit will Turn On when the Power On Signal is sent from your connected fun-Link device.

Auto TV on	Off	This Unit stays in Standby mode Off even if you Turn On your connected fun-Link device
	On	This Unit Turns On  automatically On when you Turn On your connected fun-Link device

Device list

This function lets you see the product model number or name of Connected Devices

Use to select the desired fun-Link devices listed on the TV screen,

Your connected fun-Link device will be Turned On if the device is in standby mode

Setting your Location to Home

You can set the Location of your TV to Home or Retail. Choosing Home gives you full flexibility to change predefined settings for Picture and Sound.

1. Use to Select Location, then press OK.

2. Use to select Home or Retail, then press OK.

Retail	The Unit will be set up with predefined settings for retail displays. In this setting, the PowerConsumption may possibly exceed the limit requirement of the ENERGY STAR qualification.
Home	This setting is ENERGY STAR qualified.The Unit is set to maximize the energy efficiencyfor Home setting and it can be adjusted througha choice of Picture and Sound quality selectionsaccording to your preference

Note(s)

• You must set Home in the Menu. Otherwise, personalized Picture and Sound Settings will 
• Not Be Memorized after the Unit goes into Standby Mode.

E-sticker

When you set Location to Retail store, E-sticker (Electronic Sticker) is displayed. E-sticker can be Turned Off using procedure below.

1. Use to select E-sticker, then press OK.

2. Use to select Off, then press OK.

Off	You can turn off e sticker
Top	E sticker is displayed on top of the TV screen
Bottom	E sticker is displayed on bottom of the TV screen

 Note(s)

• If you set Location to Home, E-sticker will not be displayed.

 Language 

1. Press MENU and use to select Language, then press OK.

2. Use select English, then press OK.

Note(s)

• If you need the English menu instead of the Spanish or French menus, press MENU.

Use to select Idioma or Langue, then press OK.

Use to select English then press OK.

Press MENU to Exit the Main menu.

 USB 

Your TV is fitted with a USB Connection that enables you to view JPEG photos or watch Motion JPEG files stored on a USB Memory Stick.

1. Connect the USB Memory Stick to the USB terminal on the side of your TV.

2. Press [Home2] (Home) and use to select USB, then press OK.

• The Highlighted Text will move to Start now, then press OK again.

3. Use to Select the Picture or Video, then press OK.

These Recorded Files must meet Specifications shown below:

Picture (JPEG)	Upper limit	24M pixel
Video (Motion JPEG)	Size	320 x 240 (QVGA)
	Frame rate	30fps
	Audio type	LPCM  Sampling frequency           (32 kHz, 44.1 kHz or 48 kHz)        Quantization bit rate (16 bit)

Note(s)

• Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.

• Up to 10,000 files or 1,000 folders with 19 hierarchies can be recognized.

• Up to 255 English characters can be recognized.

• This unit does Not Support MTP (Media Transfer Protocol).

• This unit supports FAT16 and FAT32 file systems.

• If the file is Not Supported, an Error message appears.

• When the USB Memory Stick is not recognized, try reconnecting it again.

• We cannot be held responsible if your USB Memory Stick is Not Supported, nor will we accept any liability for damage or loss of stored data.

• To protect your USB Memory Stick files from being erased place the write protect sliding tab in the protect position.

• Be sure to keep a backup copy of the original files on your device before you play them back on this Unit

• This unit does not recognize USB Memory Stick that requires a special driver.

• This unit is not allowed to use the USB Memory Stick which requires an External Power Supply (600mA or more). 

• A file name exceeding 128 characters or contains a dot character is Not Supported on this TV. 

• Progressive JPEG files are Not Supported.

• Only a Motion JPEG file with an “avi” extension is supported. An extension “mov” is Not Supported.

• During Motion JPEG Playback, “Pause”, “Forward” and ‘Reverse’ Do Not Work on this Unit.

Picture (JPEG)

1. Use to select the desired file, then press OK.

• To toggle between List and Thumbnails press the NUMBER 2 key each time.

• The unit goes to the Slide show automatically.

To Pause / Play the Slide show, press OK.

• Use the NUMBER keys (1 through 4) to see the file details or change the following settings 

         See the description in table below

Item	Detail
More Detail	Press 1 to display file details below.Name, Album, Date, Size and Next.Press 1 again to remove file details
Start show	Press 4 or OK to start the Slide show.While the Slide show is on, the following 2 settings will be displayed
Transitions	Press 2, then use A W to select the transition mode choosing from; None, Dissolve, Wipe right, Wipe left, Wipe up, Wipe down, Box in and Box out.
Slide time	Press 3, then use & W to change the display time choosing from; Short, Medium and Long
Stop show	Press 4 or OK to stop the Slide show.While the Slide show is Off, the following 2 settings will be displayed
Rotate	Every press on 2 will tum the picture clockwise by 90 degrees
Zoom	Press 3, then use to select the zoom factor (1x, 2x or 4x). PressOK to set the zoom factor

Video (Motion JPEG)

1 Use to select the desired file, then press OK.

To stop Playback and return to the file list, press BACK, OK or CH +.

Press CH – to play back from the beginning.

Item	detail
More detail	Press 1 to display file details below.Title: Director:, Date: and Duration:Press 1 again to remove file details.

6. Upgrade your TV Software

Emerson continuously tries to improve its products and we strongly recommend that you Upgrade the TV Software when Upgrades are available.

New Software can be downloaded from our website at http:/lemersonaudiovideo.com/support/download using the model number of your TV to find information.

Checking your Current Software version

1. Press MENU and use to select Features, then press OK.

2.Use to select Software upgrade, then press OK.

3. Use to select Current software info, then press OK.

The version and a description of the Current Software is displayed.

Upgrading the Software

You can Upgrade the Software by using a USB Memory Stick.
Preparing for the Software Upgrade
You require the following equipment :
● A PC with web browsing capability.
● An archive utility that supports the ZIP-format (e.g. WinZip for
Windows or Stuffit for Mac OS).
● A Blank empty clean formatted USB Memory Stick.
Note(s)
● Only FAT / DOS-formatted portable memory is supported.
● Use only Software Upgrades that can be found on the Emerson website.

Downloading the software

Find information and Software related to your TV and Download the Latest Software Upgrade file to your PC.

1. On your PC, open a web browser and go to http:/lemersonaudiovideo.com/support/download

2. Enter the model number in the “Type the Model Number…” field.

3. Click the desired Software to be downloaded.

Decompress the ZIP-file.

4. Copy the Upgrade file to the Empty root directory on the clean formatted USB Memory Stick.

Starting the Software Upgrade

Warning 

• When the Software Upgrade is running, don’t press any keys.

• Do Not remove the USB Memory Stick during the Software Upgrade.

• If an Error occurs during the Upgrade, retry the procedure or for further assistance, please contact the Call Center.

1. Connect your USB Memory Stick with the Upgrade file to the USB Service Port on the side of your   TV. Use only the Unit’s Front Panel Keys to enter the following Instruction Steps 2 to 6.

2. Press MENU and use to select Features, then press OK.
3. Use to select Software upgrade, then press OK.
4. Use to select Upgrade, then press OK.
5. Read the On-screen instructions and confirm that you want to continue with the Installation.

6. When the Software Upgrade is completed, press to set the Unit into Standby mode, then remove the USB Memory Stick and then press again to Turn the Unit back On.

• The TV starts up with the New Software.

          For further assistance, please contact the Call Center

7  Useful tips

FAQ

Question	Answer
My Remote Control does not work.What should i do?	.Check the Antenna or Cable Connection to the Main Unit .Check the Batteries on the Remote Control .Re-insert the Batteries with their Polarities (+/-) as indicated. .Check if there is an obstacle between the infrared sensor window and the Remote Control .Test the IR Signal Output use IR Signal Check. = p. 35If okay, then possible Infrared Sensor trouble .Aim the Remote Control directly at the infrared sensor window on the front of the Unit .Reduce the distance to the Unit. When there is an infrared-equipped device such as PC near this Unit, it may interrupt the Remote Control signal on this Unit. Move the infrared-equipped device away from this Unit, change the angle of the Device’s infrared sensor or Tum Off the infrared communication function.
How come the Initial Setup appears every time i Turn On this Unit?	Connect the RF Coaxial Cable directly to this Unit and run the Initial Setup.Make sure to complete the Initial Setup before the Unit goes into Standby mode.
Why can i not watch some RF signal TV Programs?	Auto program must be completed when you Set Up the Unit for the First time or Move it to a location where previously unavailable channels are broadcast.Make sure Auto program has been completed. «= p. 23The selected channel may not be broadcasting. When Auto program is interrupted and not completed, some channels will not be received. Make sure to complete the Auto program. “=> p. 23The selected channel cannot be viewed by the Child and Ratings Lock setting. =» p. 26The Unit requires some kind of Antenna Input. An indoor Antenna (Digital or VHF / UHF), an External Antenna (Digital or VHF / UHF) or an RF Coaxial Cable from your wall Cable / Satellite Set-top Box needs to be plugged into the Unit.
How come there is no image from the ConnectedExternal Devices?	Check if the correct Input mode is selected by pressing SOURCE or using CH + / -. Refer to Watching Channels from an External Device. “=> p. 17Check the Antenna, Cable or other Input Connection to the Unit.When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected to their corresponding colored jacks on the Unit.
When i enter a channel number, why does it change Automatically?	Many Digital channels have alternate channel numbers. The Unit changes the numbers Automatically to the ones signifying the Broadcasting Station’s channel number. These basic numbers used for the previous Analog Broadcasts. (e.g., Input Digital ch# 30 Automatically changes to Digital ch# 8.1)
Why are captions not displayed Entirely?Or why are captions delayed behind the dialog?	Closed Captions that are delayed a few seconds behind the actual dialog are common for Live broadcasts. Most captioning production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective editing is used to insure that the Closed Captions remain up-to date with the current TV screen dialog,
How can i set the clock?	There is No clock function on this Unit.
My PIN code no longer works, how can i change the Child Lock setting?	If a Power failure occurs for longer than 10 seconds the child lock setting is retained, but the PIN code is reset to the default code 0000, Refer to Child and Ratings Lock. =» p. 26

Troubleshooting

If the Unit does not perform properly when operated as instructed in this Owner’s Manual, check the following Troubleshooting Tips and All Connections Once before calling for Service

Power

No Power

• Make sure the AC Power Cord is plugged in
• Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into the AC outlet to ensure that the AC outlet operates normally. 
• If a Power Failure occurs, Unplug the AC Power Cord for 1 minute to allow the Unit to Reset Itself

Remote

Control keys do not work.

• Do NOT press more than one key at the same time
• Ensure that no keys on the Remote Control are depressed and move freely.

Universal Remote Control does not work properly.

• Refer to the user manual of the Universal Remote Control for the Emerson code

Picture

Power is On but No Screen Image.

• Check whether the Connection for the Antenna, Cable or Satellite Set-top Box is Connected Correctly.

• Check whether All the Cables to the Unit are connected to the correct Output Jack on your separate Device like Blu-ray Disc / DVD Recorder.

• Make sure that the selected Input mode is connected to the working Input jack.

• Check if your computer is NOT in Sleep Mode when the Input Mode on this Unit is in PC mode. Tap any Key on the Computer Keyboard to Wake it up.

No Color

• View other TV channels. The problem might be limited to the broadcasting station. 
• Adjust Color in Picture settings. =» p. 21

Picture Poor

• Adjust Contrast and Brightness in Picture settings. =» p. 21
• For the Best Picture Quality, watch “High Definition’ wide screen Programs.

           If the HD content is not available, watch “Standard Definition” Programs instead

You see Pixilation on the Screen.

• When the capabilities of the Unit exceed the capabilities of the Digital

              Broadcasting, the signal will be increased to match the capabilities of the

             Display on the Unit. This may cause Pixilation, Noise or Trash

Unusual picture appears and the TV does Not Operate.

• Press the Power key first. If it does not solve the problem, then press the keys on the Remote Control in the order shown below to change the Unit to the Live Mode

       SLEEP => PICTURE SIZE 

Sound

No sound, distorted sound or incorrect Audio Sound is heard when using the HDMI-DVI Connections.

• Make sure that the Analog Audio signals from the HDMI-DVI Device are connected to the Analog Audio (L/R) Input jacks Refer to For PC Input signal =» p. 18
• When using Component Analog Video, Composite Analog Video or PC VGA Video make sure that the Analog Audio (L/R) connectors are mounted into the Audio (L/R) Input jacks.

Sound Intermittent or No Sound

• Check if the Audio Cable is connected into the Unit correctly.

You Switch to a Different Input and the Volume Changes.

• This Unit will memorize the Volume Level from the last time you adjusted it.

• If the Volume of the Sound from another Device is Higher or Lower, then the Loudness will Change. 
• Make sure Auto volume leveling is set to On. == p. 22

Picture & Sound

No Picture or Sound

• Check if the Power is On
• Check whether all the cables to the Unit are connected to the correct Output jack of your device like Blu-ray / DVD Recorder.

• View other TV channels. The problem might be limited to the Broadcasting Station or Weak Signal Strength, if DTV channel check signal strength Refer to Antenna confirmation = p. 24.
• Unplug the AC Power Cord and wait for about 1 minute, then Plug the AC Power Cord and turn On the Unit again
• Check whether the Connection of the Antenna or Cable / Satellite Set-top Box is connected correctly.
• Make sure that the selected Input mode is connected to the working Input jack. 

• Check if your computer is NOT in sleep mode when the Input mode of this Unit is in PC mode. Tap any key on the keyboard to wake up your computer. 
• Make sure that the sound is not muted. Press DK so that the volume bar and current volume level will appear on the TV screen 
• Make sure that the volume is NOT set to 0 If so, use VOL + /- to adjust to the desired volume.

Adjusted Picture or Sound settings are not effective every time the Unit is turned On.

• You must set Home in Location. =» p. 30 (Otherwise, the settings you adjusted will not be memorized after the Unit goes into Standby Mode.)

You see a Distorted Picture or Hear an Unusual Sound. (Analog TV –NTSC signal)

• You may be getting interference from electrical appliances, automobiles, motorcycles or fluorescent lights.
• Try moving the Unit to another Location to see if this is the Cause of the Problem

 Ghosts, lines or streaks in picture (Analog TV- NTSC signal)

• Electrical interference from nearby appliances may affect picture quality.
• View other TV channels. The problem might be limited to the Broadcasting Station or Weak Signal Strength, if DTV channel check signal strength Refer to Antenna confirmation = p. 24.

Picture Poor, Sound Intermittent or No Sound

• View other TV channels. The problem might be limited to the Broadcasting Station or Weak Signal Strength, if DTV channel check signal strength Refer to Antenna confirmation = p. 24.

Screen

You Switch to a different Input and the Screen Size changes.

• This Unit will memorize the Viewing Mode from the last time you used those Particular Input Modes.

The Display image does not cover the Entire Screen.

• If you are using the Unit as a PC Monitor, make sure that Horizontal position and Vertical position in PC settings are set correctly.
• If you are watching TV or using the Composite Video, Component Video or HDMI with 480i Input, press PICTURE SIZE Repeatedly to Switch to various Screen Modes.

Different color marks on the TY screen

• View other TV channels. The problem might be limited to the broadcasting station, missing data or pixilation due to weak signal strength:

Closed Captions

Closed Captions are displayed as a white box. No Closed Captions are displayed in the Closed Captions-Supported Program.

• Interference from buildings or weather conditions may cause captioning to be incomplete if watching Analog TV signals.
• Broadcasting Station may shorten the program to insert advertisements.
• The Closed Captions Decoder cannot read the information of a shortened program

Black Box is displayed on the TV Screen.

• The Text mode is selected. For Closed Captions, select CC-1, CC-2, CC-3 or CC-4, 24

Note(s)

• The LCD screen is manufactured to provide many years of useful life

        Occasionally a few non active pixels may appear as a fixed point of blue, green or red

         This is not to be considered a Defect in the LCD screen

• Some Functions are not available in Specific Modes, but this is Not a Malfunction. Read the Description in this Owner’s Manual for more Details on Correct Operations of this Unit.

8  Information

Glossary

Analog TV (NTSC)

Acronym that stands for National Television Systems Committee and the name of Analog broadcasting standards

Off the air Analog TV signals are no longer being sent by major broadcasting stations in the USA.

Aspect ratio

The width of a TV screen relative to its height Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).

CEC (Consumer Electronics Control) 

This allows you to operate the linked functions between our brand devices with CEC feature and this Unit. We Do Not guarantee 100% interoperability with other brands of CEC compliant devices.

Component Video

This is a Video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is. There are several signal formats, including Y / Pb / Pr and Y / Cb/ Cr.

Dolby Digital

The system developed by Dolby Laboratories to compress Digital sound.

It offers Stereo Sound (2ch) or multi-channel Audio.

DTV (ATSC)

Abbreviation that stands for Advanced Television Systems Committee and the name of the Digital broadcasting standards

E-sticker

E-sticker is showing set features, technical information, etc. on this TV set that is displayed on the TV screen mainly used by TV retailers. Previously the information was on a printed sticker that was put on the display.

HDMI (High-Definition Multimedia Interface)

Interface that supports All uncompressed, Digital Audio / Video formats including Set-top Box, Blu-ray / DVD Recorder or Digital television, over a single cable.

HDTV (High Definition TV)

Ultimate Digital format that produces high resolution and high picture quality

PIN code

A stored 4-digit number that allows access to Parental control features.

SAP (Secondary Audio Program)

Second-Audio channel delivered separately from the Main-Audio channel.

This Audio channel is used as an alternate in bilingual broadcasting.

SDTV (Standard Definition TV)

Standard Digital format that is similar to the Analog TV picture quality.

Maintenance

Cabinet Cleaning

• Wipe the front panel and other exterior surfaces of the Unit with a soft cloth.
• Never use a solvent or alcohol. Do not spray insecticide liquid near the Unit. Such chemicals may cause damage and discoloration to the exposed surfaces.

Panel Cleaning

Wipe the panel of the Unit with a soft cloth. Before cleaning the panel, disconnect the AC Power Cord.

Servicing

Should your Unit become inoperative, Do Not try to correct the problem yourself. There are no user serviceable parts inside. Call our toll free customer support line found on the cover of this Owner’s Manual to locate an Authorized Service Center.

IR Signal Check

If the Remote Control is not working properly, you can use a Digital or Cell Phone Camera to see if it is sending out an infrared signal.

e.g. With a Digital Camera:

Point the Digital Camera towards the Remote Control infrared diode at the front of the Remote Control. Press any key on the Remote Control and look at the Camera Display. If an infrared pulsating light   appears on the Display, the Remote Control is sending out an IR signal.

Note: Some Cameras have an IR Filter and will not Display the IR signal.

9  Specifications

Model#	LF501EMSF
Picture
Type	FHD (1920 x 1080 pixels 60Hz)
Aspect Ratio Viewing Angles	16:9
Built-in Digital / Analog Tuner	ATSC (Digital) / NTSC (Analog)
Sound
Mono / Stereo	Mono, Stereo, Virtual surround sound
Power Output (RMS watts)	1OW x 2
Equalizer	5 Band
Ease of Use
Picture Format	SD (4:3 Source) : Normal / 16:9 / Movie expand / Zoom / Wide HD (16:9 Source) : Normal / 4:3 / Movie expand / Zoom / Wide HDMI AV (4:3 Source) : Normal / 16:9 / Movie expand / Zoom / Wide / Full HDMI AV (16:9 Source) : Normal / 4:3 / Movie expand / Zoom / Wide / Full PC Source : Normal / Full / Unscaled (Refer to HDMI AV (16:9 Source) above if PC has HDMI Output)
Photo Slice Show	JPEG Files Only
Video Playback	Only Motion JPEG 320 x 240, 30 fps with file extension “avi” will Playback.
Channel
Channel Coverage	Terrestrial DTV (ATSC)  VHF: 2~13                                           UHF: 14~69 (Each Channel has e.g. 2.1~2.9, 3.1~3.9, etc.) Terrestrial Analog (NTSC): VHF: 2~13                                             UHF: 14~69
CATY (Analog NTSC)	2-13,A-W (Analog W+1~W+84), A-S~A-1, 5A
Tuning System	Channel Frequency Synthesized Tuning System
Channel Access	Direct Access Number Keyboard, ; Programmable Scan, Channel +(up) / —(down) and PREV. CH (Previous Channel)
Connectivity
Component Video Input 4(Y/Pb/Pr)	Supporting Video Signals : 480i/p, 720p, 10801 @60Hz
Composite Video Input (Shared Y Green Terminal with Component Video)	1
HDMI Input	3 Supporting Video Signals : 480i/p, 720p, 10801 60Hz, 1080p @24/30/60HzPC-Input Signal up to FHD (1920 x 1080)
Analog Audio L/R Input	1
PC Input	via VGA, HDMI and HDMLDVI + Analog Audio L/R
USB	1
Digital Audio Output	1Supporting Dolby Digital
Headphone Output	11/8  inch (3.5mm)
Power
Power Requirements	120V~ +/— 10%, 60Hz +/— 0.5%
Temperature
Operating Temperature	41 °F (5 °C) to 104 °F (40 °C)

10  Warranty

LIMITED WARRANTY

NINETY (90) DAY LABOR / ONE (1) YEAR PARTS

WARRANTY COVERAGE:

This warranty obligation is limited to the terms as set forth below.

WHO IS COVERED:

This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.

WHAT IS COVERED:

This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period. At its option, the company will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory, or (3) refund the original purchase price of the product.

Replacement products or parts provided under this warranty are covered against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product’s warranty, whichever provides longer coverage for you. When a   product or part is exchanged, any replacement item becomes your property and the replaced item becomes company property. When a refund is given, your product becomes company property.

Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty.

Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.

WHAT IS NOT COVERED – EXCLUSIONS AND LIMITATIONS:

This Limited Warranty applies only to new company manufactured products that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any hardware product or any software, even if packaged or sold with the product, as manufacturers, suppliers, or  publishers may provide a separate warranty for their own products packaged with the bundled product.

The company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or other additional product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty.

This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-supplied product, (b) to damage caused by service performed by anyone other than company approved Authorized Service Location, (c) to a product or a part that has been modified without written company permission, or (d) if any serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished product sold “AS IS” by some retailers.

This Limited Warranty does not cover:

• Shipping charges to return defective product. 
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of the company. 
• Damage or claims for products not being available for use, or for lost data or lost software.
• Damage from mishandled shipments or transit accidents when returning product.
• A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.
• A product used for commercial or institutional purposes (including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt can be provided.
• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE…

Contact the Customer Care Center at:

1 866 309 8819

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE   REMEDY FOR THECONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED

BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights. You may have other rights which vary from   state/province to state/province.

FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501

EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS

OF EMERSON RADIO CORP, MOONACHIE, NEW JERSEY, U.S.A.

FUNAI CORPORATION, Inc.

19900 Van Ness Avenue, Torrance, CA 90501

You can download the PDF version of Emerson LF501EM5F Owner’s manual here.